PEEK Raw Materials

AKSOPEEK® Passed biocompatibility testing, the material has no cytotoxicity, mutagenicity, carcinogenicity, and does not cause allergies.

PEEK5600LF30 PEEK HPV is a peek material with low friction coefficient and good wear resistance. Among them, The composition consists of 70% PEEK, 10% PTFE, 10% graphite, and 10% carbon fiber. OVERVIEW The name of this material is PEEK5600LF30. The filling of graphite and PTFE can well reduce the friction coefficient of the material, and […]

PEEK5600GF30 Compared with unfilled PEEK(PEEK5600G), this 30% glass fiber reinforced PEEK material(PEEK5600GF30) exhibits increased mechanical strength and high rigidity. Plus, improved creep strength and dimensional stability are delivered by the 30% glass fiber filled PEEK. OVERVIEW The most commonly used glass fiber filled peek content is 30%. The name of this material is PEEK5600GF30. Compared […]

PEEK5600CF30 PEEK5600CF30 is a 30% carbon filled PEEK material that is manufactured by JUNDE. Its carbon fiber reinforcement supports the material a high level of rigidity. Carbon fiber reinforced PEEK demonstrates very high mechanical strength values. OVERVIEW The most commonly used carbon fiber filled peek content is 30%. The name of this material is PEEK5600CF30. […]

PEEK5600G PEEK5600G is one of unfilled or natural PEEK. Outstanding chemical resistance and a high operating temperature (up to 250℃/480F) round out PEEK profile. PEEK5600G has excellent dimensional stability combined with high creep stability, ensuring the suitability of PEEK for the most sophisticated machined parts. OVERVIEW PEEK5600G is the most commonly used brand in the […]

PEEK5600P Coarse Powder Relying on the previous ten years of experience in the PEEK industry, the company has officially entered the polymerization production of PEEK resin, which can provide stronger raw material guarantees for PEEK parts and profiles and create advantageous conditions. At the same time, through the research and development and production of profiles […]

PEEK powder is made by grinding the coarse powder obtained after PEEK polymerization. Powders of different sizes can be produced through different grinding processes. PEEK5600P fine powder is a powder with a medium melt flow rate, suitable for processing methods such as compression molding and spraying. PEEK Properties Test items Test standards or instruments unit […]